| Customization: | Available |
|---|---|
| Application: | Food, Oil, Industrial Alcohol, Alkali, Acid, Industrial |
| Feature: | Disposable, Shock Resistance |
|
Still deciding? Get samples of US$ 169/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make at Made-in-china.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
|
Item
|
Container Flexitank
|
|
Grade
|
Food and Non-food
|
|
Type
|
Top Load &Discharge flexitank
Bottom Loading &Discharging flexitank
Top loading & Bottom Discharging flexitank
|
|
Material
|
100% new PE Film+PP Fabric
|
|
Usage
|
Food liquid, non-food liquid, chemicals packaging and transportation
|
|
Certificate
|
COA, ISO9001, etc.
|
|
Accessories
|
bulkhead, 5 stainless steel pipes, corrugated paper, etc.
|
|
Assistant designs
|
Heating pad---Speed up the melting of goods especially in cold weather
Airvent --Air release
|
|
Valve
|
3 inch ball valve
|
|
Loading Capacity
|
1000L - 24000L
|
|
Layers
|
3+1 layer 4+1 layer or customized
|
|
Advantage
|
Capacity as big as 24000L
Volume after folded only 0.4CBM Food-grade and degradable Simple structure, the rapid installation High Strength to gurantee safty |
| Project | S.N | Inspection items | technical requirement |
| 1 | Appearance | Brand new material, translucent, smooth surface, no impurities, no pollution, no wrinkles, particles, ribs, blisters | |
| 2 | Structure | Three layer / four layer composite | |
| 3 | Thickness Tolerance | 5% | |
| 4 | Tensile strength | ≥37MPa | |
| 5 | Elongation at break | ≥800% | |
| PE inner | 6 | Falling Darts | ≥1200g |
| 7 | Temperature resistance | -20 ºC, no adhesion, weld mark and other abnormalities were found when the load was 9.8N, 80 ºC and 1H | |
| 8 | Right angle tear | ≥90 | |
| 9 | Heat sealing requirements | Hot welding seam straight, no obvious hot or virtual hot | |
| 1 | Appearance | The cloth surface is smooth, white, no jumper, no damage, no dirt, no smell, and the mark line is clear. | |
| 2 | The stitching is straight and even, with inner folded hemming and hemming, without stitching jumper, the number of stitches is 10cm or more than 10, and the wiring should be overlapped and sutured without leakage | ||
| Sew | |||
| Longitude≥1750N | |||
| 3 | Tensile strength | Latitudinal≥1750N | |
| PP outer | Sewing part ≥ 1500N | ||
| 4 | Elongation at break | Longitude ≥ 20% | |
| Latitudinal≥20% | |||
| 5 | Bursting force | ≥3400N | |
| 1 | Valve | Material PP, diameter 3 inch / 4 inch | |
| Valve | 2 | Handle,cover | ≥0.4MPa |
| 3 | Seal ring | ≥0.4MPa | |
| Airtightness | In the whole bag inflation state, there is no air leakage at the heat sealing line and valve seal of the bag body. | ||
Standard accessories:
1.One piece of flexitank
2. Bulkhead
3.Five pieces of stainless steel pipes
4.One roll of corrugated paper
5.Small accessories barrier plate, tapes, warning label
){kind=link}